Payment & Shipping Terms:
|Package:||According To The Size||Diameter:||6mm 8mm 10mm|
|Heigth:||25mm 27mm 37mm||Application:||Furniture|
M6 M8 M10 Yellow Zinc Round Nut / Stamping Nut With 3 Holes For Furniture
1. Standard: ISO9001
2. Size: M6-M10
3. Type: Stamping Round Nut
4. Material: Carbon steel
5. Finish: zinc plated
6. Mainland: Guangdong China
7.Quality: Top high quality
8. Delivery time: Normally in 15-30 days
9. Package: Cartons&pallets or according to customer's requirement.
Round base t-nuts are nice because they are easier to install than 4 prong t-nuts.
They are used in most commercial climbing gyms because they are easy to install and stay secure.
Unlike 4 prong t-nuts you don't need two people to install them properly. You can insert them by hand into the pre-drilled holes in your climbing wall. There are 3 holes in each t-nut which allow you to fasten a couple screws into the wood from behind the wall. These screws will keep the t-nut from spinning and from popping out when you try to fasten a hold to the wall. 3 zinc plated screws are included with each t-nut ordered. If you are willing to spend the extra money you'll save a lot of time!
|Name:||M4/M5/M6/M8/M10 T-nut four prongs Tee nuts|
|Size:||M6*25 M6*27 M8*27 M8*37 M10*37|
|Packing:||Can be customized|
|Type||Type A Stamping Nut|
|Payment Term||100% T/T|
Sometimes old T-Nuts become damaged with use or are lost when furniture is moved.
Damaged or lost T-Nuts need to be replaced. T-Nuts provide the nut base into which the
hanger bolt of a furniture leg may be screwed. The hanger bolt screws into the T-Nut and
extends up into a cavity predrilled to sufficient width and depth to contain the screwed in
Note about Size
The size of the hanger bolt determines what the size the T-Nut needs to be. These T-Nuts fit
the Metric Size M8 Hanger Bolts. It is important to select the proper size T-Nuts for your
Installing the T-Nut
Select the location for the T-Nut installation
If a cavity is already present for the screwed in hanger bolt, all that needs to be done is to tap the T-Nut
into the proper location with the sleeve of the T-Nut extending into the already present cavity.
If no cavity is present for the sleeve of the T-Nut and the hanger bolt, a new cavity will need to be drilled at
the proper location. After the cavity is drilled, then the T-Nut may be tapped into the installation site.
The furniture leg is then securely screwed into the T-Nut and the installation is complete
Why should you choose us ?
1.We are manufacturer of fasteners for 20 years in DongGuan and got rich
experience, any kinds of standard or non-standard will be customized
according to your drawing.
2. We have the development team, production team, sales team, quality control
department and full array of equipment.
3.We will offer the competitive price and high quality for our clients.